Philips FC8920-FC8910 Mini turbo brush specific types only, Using the appliance, Storage, English

English 9

Mini turbo brush (specific types only)

The mini turbo brush is specially designed for effectively picking up animal hairs and fluff from furniture and mattresses.The unique brush inside the mini turbo brush loosens the hair from the fabric.Then the hair is picked up by the vacuum cleaner.

The mini turbo brush can be attached to the handgrip of the hose or to the telescopic tube.

1To attach the mini turbo brush, insert it into the handgrip or the telescopic tube and turn a little.

2To detach the mini turbo brush, pull it out of the handgrip or the telescopic tube while turning it a little.

Using the appliance

1Pull the cord out of the appliance and put the mains plug in the wall socket.

2Press the on/off button on top of the appliance to switch on the appliance (Fig. 16).

Tip:To avoid bending your back, press the on/off button with your foot.

3If you want to park the tube for a moment during vacuum cleaning, insert the ridge on the nozzle into the parking slot (Fig. 17).

4To ensure stable parking of the telescopic tube, adjust the tube to the shortest length.

5To switch off the appliance, press the on/off button on top of the appliance.

Adjusting suction power

1During vacuum cleaning, you can adjust the suction power with the selection wheel on top of the appliance (Fig. 18).

-- Use maximum suction (+) power to vacuum very dirty carpets and hard floors. -- Use minimum suction power (-) to vacuum curtains, tablecloths etc.

2Specific types only:You can also adjust the suction power with the suction power slide on the handgrip (Fig. 19).

Storage

1Switch off the appliance and remove the mains plug from the wall socket.

2Press the cord rewind button to rewind the mains cord (Fig. 20).

3Specific types only:Always put the Tri-Active nozzle in the carpet setting when you store it. This prevents the side brushes from becoming bent (Fig. 12).

4Put the appliance in upright position.To attach the nozzle to the appliance, insert the ridge on

the nozzle into the storage slot (Fig. 21).

To ensure stable storage of the telescopic tube, adjust the tube to the shortest length.

Replacing/emptying the dustbag

The plug must be removed from the socket-outlet before cleaning or maintaining the appliance.

Replacing the disposable dustbag

-- Replace the dustbag as soon as the dustbag-full indicator has changed colour permanently, i.e. even when the nozzle is not placed on the floor (Fig. 22).

1Pull the cover upwards to open it (Fig. 23).

2Lift the dustbag holder out of the appliance (Fig. 24).