Service Modes, Error Codes, and Fault Finding

FHP PDP

 

5.

 

EN 23

will be lost. If you intend to close this window before

11. Switch off the set and replace the Logic Board with another

replacing the board, you should save the settings so you

one.

 

 

 

 

 

can load them later.

 

 

 

 

 

 

10. Click the 'Off' button.

Logic Board Exchange (2)

2. Write NVM Data to the new Logic Board

1.

Remove the Mains cable from the Mains filter.

2.

Connect the FHP A4 Service cable to CN01 and CN06 of the Logic Board. Connect the power cable from the PSU to the FHP A4 Service cable on the CN06 side of the Logic Board. Connect the ComPair cable to the CN01 side of the FHP A4 Service cable.

3.

4.

Click the "On" button

5.

Load the saved values

Click button “paste to replacement”

6.

Click button "Ship Out" (1)

7.Disconnect the ComPair cable and Power cable from the FHP A4 Service cable on the CN01 and CN06 sides of the Logic Board. Disconnect the FHP A4 Service cable. Reconnect the Power cable from the PSU to CN06 and the LVDS cable to CN01 on the Logic Board.

(1)The PDP screen will be blanked for about 15s, then 15s later, the 'Ship out' process will end

G_16400_020.eps 010806

Figure 5-14 Logic Board Exchange (2/2)

1.

Switch off the set and replace the Logic Board by another

8. Disconnect ComPair and remove the service cable, plug in

 

one. Now connect the service cable to connectors CN01

the power cable at CN06 and the original LVDS cable at

 

and CN06. Connect the power cable to the CN06 side of

CN01.

 

the service cable, and the ComPair cable to the CN01 side.

 

2.

Restart the display with the new board.

 

3.

Click the 'On' button.

 

4.

The module type will again appear in the title bar. This may

 

 

be different now from step 6 on the previous page, because

 

 

now another Logic Board is used. If you closed the window

 

 

after step 9 and did save the settings you should load them

 

 

now. Use the ‘Load’ button to do so.

 

5.

Click button 'Paste to replacement'. The settings previously

 

 

copied from the old board are now written to the new board.

 

 

If successful the button 'Ship out' will be enabled.

 

6.

Click button 'Ship out'.

 

7.

Now a process of voltage feedback initialization and self-

 

 

adjustment starts. This will take a few seconds. When

 

 

ready you can switch off the display.

 

Page 23
Image 23
Philips FPF42C128135UA-52 technical specifications Logic Board Exchange

FPF42C128135UA-52 specifications

The Philips FPF42C128135UA-52 is a state-of-the-art lighting solution designed to meet the needs of modern residential and commercial spaces. This fixture exemplifies innovation, efficiency, and aesthetic appeal, making it a popular choice among architects and interior designers.

One of the main features of the FPF42C128135UA-52 is its energy efficiency. Utilizing advanced LED technology, this fixture consumes significantly less energy compared to traditional incandescent or fluorescent lighting. It boasts a remarkable efficacy that ensures maximum illumination with minimal power consumption, resulting in lower energy bills and a reduced carbon footprint.

The design of the FPF42C128135UA-52 is another defining characteristic. Philips has mastered the balance between functionality and aesthetics, creating a product that seamlessly integrates into a variety of environments. Its sleek, contemporary design makes it suitable for both residential applications, such as living rooms and kitchens, as well as commercial settings, like offices and retail spaces. The fixture is available in multiple color temperatures, allowing users to choose between a warm, inviting light or a bright, energetic glow, depending on the desired ambiance.

In addition to its aesthetic and efficiency qualities, the FPF42C128135UA-52 incorporates smart lighting technologies. Many models in this range are compatible with various smart home systems, enabling users to control their lighting remotely through smartphones or voice-activated devices. This level of customization provides added convenience, allowing users to adjust brightness levels and create dynamic lighting scenes that enhance their living and working environments.

Durability is yet another advantage of the FPF42C128135UA-52. Built with high-quality materials, this fixture promises longevity and reliability over time. Its robust construction ensures it can withstand the rigors of daily use while maintaining peak performance, making it an excellent investment for both homeowners and business owners.

In summary, the Philips FPF42C128135UA-52 is a versatile and efficient lighting solution that combines cutting-edge technology with stylish design. With its energy-saving capabilities, smart compatibility, and durable construction, it stands out as an exemplary choice for anyone looking to enhance their space’s lighting while embracing sustainability and innovation. Whether for home or business, this Philips fixture is bound to illuminate with class and efficiency.