Philips FW-C250 Discs for playback, Loading the CD Changer, Disc Direct Play, Playing a Disc

Models: FW-C250

1 28
Download 28 pages 40.4 Kb
Page 15
Image 15
Discs for playback

15

CD

Discs for playback

This system can play all digital audio CD, finalized digital audio CD-Recordable and finalized digital audio CD- Rewritable format discs.

Loading the CD Changer

1Press CD to select CD mode.

2Press OPEN•CLOSE.

The CD changer tray slides out.

3Load a disc with the printed side up

in the right tray.

You can load another disc in the left tray.

To load the third disc, press the DISC CHANGE button.

The CD changer tray will rotate until the empty tray is ready for loading.

4Press OPEN•CLOSE to close the CD changer tray.

The total number of tracks and the playing time of the selected disc appear on the display.

Note:

To ensure good system performance, wait until the CD changer completely reads the disc(s) before proceeding.

Disc Direct Play

You can play a disc directly by pressing the DISC 1, DISC 2 or DISC 3 button.The CD player will stop at the end of playback of the selected disc.

A lit button indicates that a disc is loaded in the disc tray.

A flashing button indicates that a disc is playing.

Playing a Disc

1PressÉ to start playback.

The disc tray, track number and

elapsed playing time of the current track appear on the display.

To interrupt playback, press Å.

The playing time flashes.

To resume playback, press É again.

2 To stop playback, press Ç.

Note:

All the available discs will play once, then stop.

Disc Change

You can change the outer two discs while the third inner disc is stopped or is playing.

1Press DISC CHANGE.

The CD changer tray slides out.

2Replace the discs in the left and right disc trays.

If you wish to change the inner disc during playback, press DISC CHANGE again.

"DISC CHANGE" will be displayed.

The disc will stop playing.

The CD changer tray will close to

retrieve the inner disc and then open again with the inner disc accessible.

3Press OPEN•CLOSE to close the CD changer tray.

Selecting a desired track

Selecting a desired track when playback is stopped

1Press í or ë until the desired track appears on the display.

2PressÉ to start playback.

The selected track number and elapsed playing time appear on the display.

Selecting a desired track during playback

Press í or ë until the desired track appears on the display.

The selected track number and elapsed playing time appear on the display.

If you press í once it will skip to the beginning of the current track and play the track again.

Note:

Pressingí during shuffling can only skip to the beginning of the current track.

Searching for a particular passage during playback

Press and hold à or á until the desired passage is located.

The volume will be reduced.

Play returns to normal when à or á is released.

Programming Tracks

Programming tracks of a loaded disc is possible when playback is stopped.The display will indicate the total tracks stored in the program. Up to 40 tracks can be stored in the memory in any order. When 40 tracks are stored and you attempt to store another track, the display will show “FULL”.

1Load the desired discs in the disc trays.

2Press PROGRAM to start programming.

The PROG flag starts flashing.

3Press the CD (CD 1•2•3) or DISC 1/2/3 button to select the disc.

4Pressí or ë to select the desired track.

pg 01-28/C250/37-En

15

12/6/00, 2:20 PM

3139 115 20353 (ENG)

Page 15
Image 15
Philips FW-C250 manual Discs for playback, Loading the CD Changer, Disc Direct Play, Playing a Disc, Disc Change