25 | TROUBLESHOOTING |
Tape Deck Operation
Recording or playback cannot be made or there is a decrease in audio level.
•Dirty tape heads, capstans or pressure rollers.
™See section on tape deck maintenance
(page 24).
•Magnetic
™Use demagnetizing tape.
General
System does not react when any button is pressed.
• Electrostatic discharge.
™Press
No or poor sound.
•Volume is not turned up.
™ Adjust VOLUME.
•The headphones are connected.
™ Disconnect the headphones.
•Speakers are not connected or are connected wrongly.
™Check that the speakers are connected correctly.
™Make sure the stripped speaker wire is clamped.
Reversed left and right sound.
•Speakers are connected wrongly.
™ Check the speaker connections and location.
Lack of bass sound or apparently imprecise physical location of musical instruments.
•Speakers are connected wrongly.
™ Check the speaker connection for proper phasing, colored/black wires to colored/black terminals.
Remote control has no effect on the system.
• Wrong source is selected.
™Select the source (CD,TUNER, etc.)
before pressing the function button, (É, í, ë, etc.).
• The distance to the system is too large.
™Reduce the distance.
•Batteries are inserted incorrectly.
™ Insert the batteries with their polarities (+/– signs) as indicated.
•Batteries are exhausted.
™Replace the batteries.
Timer is not working.
•Clock is not set.
™ Set the clock.
•Timer is not switched on.
™Press CLOCK•TIMER to switch on the timer.
•Recording or dubbing is in progress.
™ Stop recording.
Clock setting is erased.
•There was a power failure.
™ Reset the clock.
System displays features automatically.
•Demonstration mode is switched on.
™Press and hold Ç (on the system) for five seconds to switch off the demonstration.
All lighted buttons are not lit.
•Display is switch on in DIM 3 mode.
™ Press DIM until DIM OFF display mode is shown.
pg | 25 | 12/6/00, 2:20 PM | 3139 115 20353 (ENG) |