Switching the system to standby mode

Switching the system to standby mode

Press STANDBY ON or B on the remote control.

The system will switch to standby mode.

Selecting the Source

Press the respective source selection button: CD, TUNER, TAPE or AUX.

The display indicates the selected source.

Note:

For an external source, make sure you have connected the audio left and right OUT terminals of the external equipment (TV, VCR, Laser Disc player, DVD player or CD Recorder) to the AUX IN terminals.

DIM mode

You can select the desired brightness for the display.

Press DIM to select DIM 1, DIM 2, DIM 3 or DIM OFF display mode.

The DIM appear on the display.

"DIM 1", "DIM 2", "DIM 3" or "DIM OFF" will be displayed depending on the mode selected.

DIM OFF - normal brightness with Spectrum Analyzer On

DIM 1 - normal brightness with Spectrum Analyzer Off

DIM 2 - half brightness with Spectrum Analyzer On

DIM 3 - half brightness with Spectrum Analyzer Off and all LEDs on the system will be switched off.

Sound Control

VOLUME ADJUSTMENT

Adjust VOLUME to increase or decrease the sound level.

For Personal Listening

Connect the headphones plug to the n socket at the front of the system. The speakers will be muted.

DIGITAL SOUND CONTROL (DSC) The DSC feature enables you to enjoy special sound effects that have preset equalizer settings, providing the best music reproduction.

1Press to select the DSC feature.

2Adjust JOG CONTROL to select OPTIMAL, JAZZ, ROCK or TECHNO.

The Digital Sound Control display panel will light up respectively.

“OPTIMAL, JAZZ, ROCK or TECHNO” and the respective flag

will be displayed.

Note:

When ”OPTIMAL” sound is selected, DBB will be switched on automatically.

OPERATING THE SYSTEM

DYNAMIC BASS BOOST (DBB)

The DBB mode enhances the bass response.

Press DBB to switch on bass response.

The DBB button lights up.

“DBB ON” and the DBB flag will be displayed.

To switch off DBB

Press DBB again.

The DBB button light is switched off.

“DBB OFF” will be displayed.

The DBB flag disappear from the display.

Note:

Some CDs or tapes might be recorded in high modulation, which causes a distortion at high volume. If this occurs, switch off DBB or reduce the volume.

English

11

Untitled-60

11

12/12/00, 6:33 PM

3139 116 19381

Page 11
Image 11
Philips FW-C38 Switching the system to standby mode, Selecting the Source, DIM mode, Sound Control, Volume Adjustment