Notes:
– For recording, use only tape of IEC type I (normal tape) or IEC type II (Cr02).
– The tape is secured at both ends with leader tape. At the beginning and end of tape, nothing will be recorded for six to seven seconds.
– The recording level is set automatically, regardless of the position of VOLUME, DBB, Incredible Surround, DSC or VEC.
– To prevent accidental recording, break out the tab on the left shoulder of the tape side that you want to protect.
– If "CHECK TAPE" is displayed, the protection tab has been broken. Put a piece of clear adhesive tape over the opening. Do not cover the Cr02 tape detection hole when covering the tab opening.
One Touch Recording
• For One Touch Recording, as soon as you press RECORD, the current source (CD, TUNER or AUX) will be recorded on tape deck 2.
1 Load a blank tape in tape deck 2.
2 Press RECORD to start recording. ™ The REC flag starts flashing.
3 Press Çto stop recording.
Note:
– When you press RECORD while in TAPE
mode, "SELECT SOURCE" will be displayed. One Touch Recording is not possible in TAPE mode.
19 | 12/12/00, 6:33 PM |
RECORDING
CD Synchro Start Recording
1Load a blank tape into tape deck 2 and a disc into a disc tray.
2Press CD to select CD mode.
•You can program the tracks in the order you want them to be recorded (see Programming Tracks). If not, select the disc by pressing CD (CD 1•2•3) and the
tracks are recorded according to the order on the selected disc.
3Press RECORD to start recording. ™ The REC flag starts flashing.
•CD will start playback automatically.
4 Press Çto stop recording.
Dubbing tapes tape deck 2)
1Press TAPE ( TAPE 1•2 ) to select tape deck 2.
2Load the prerecorded tape into tape deck 1 and a blank tape into tape deck 2 with full spool to the left.
3Press DUBBING
™"DUB" with "2" scrolling right will be displayed.
•Dubbing will start immediately.
™The REC flag starts flashing. 4 Press Çto stop dubbing.
3139 116 19381
English
19
