Philips FW-C38 manual Playing the program, Erasing the program when, programming is not possible

CD

English	Notes:
	– If the total playing time is more than
	“99:59“ or if one of the programmed
	tracks has a number greater than 30,
	then “--:--” appears on the display
	instead of the total playing time.
	– If the system is reading the discs,
	programming is not possible,
	“READING” will be displayed and
	followed by ”DISC X”. ”X” is the
	current read disc number.
	– During programming, if no button is
	pressed within 20 seconds, the system
	will exit program mode automatically.

Reviewing the program Reviewing of the program is possible only when playback is stopped.

• Pressíor ërepeatedly to review the programmed tracks.

• Press Çto exit review mode.

Playing the program

1Press Éto start program playback.

™“PLAY PROGRAM” will be displayed.

™The track number and elapsed

playing time of the current track will appear on the display.

•If you press REPEAT during program playback, the current track or all programmed tracks will be played repeatedly.

14

™“TRACK” or "PROGRAM" will be displayed.

™The REPEAT and PROG flags appear on the display.

2Press Çto stop program playback.

Notes:

–If you press any of the CD DIRECT PLAY buttons, the system will play the selected disc or track and the stored program will be ignored temporarily. The PROG display also will disappear temporarily from the display. It will reappear when playback of the selected disc ends.

–REPEAT DISC mode will be cancelled when program playback begins.

Erasing the program (when

playback is stopped)

•Press Ç.

™“PROGRAM CLEARED” will be displayed.

Note:

–The program will be erased when the system is disconnected from the power supply or when the CD carousel tray is opened.

Shuffle (only on remote control)

In shuffle mode, the system plays all the available discs and their tracks in random order. Shuffle may be used also when tracks are programmed.

To shuffle all the discs and tracks

1Press SHUFFLE.

™“SHUFFLE” will be displayed.

™The SHUFFLE flag, the disc and the track selected at random appear on the display.

•The discs and the tracks will be played in random order until you pressÇ.

•If you press REPEAT during shuffling, the current track or all available discs will be played repeatedly.

™“TRACK” or “ALL DISC” will be displayed.

™The REPEAT and SHUFFLE flags appear on the display.

2Press SHUFFLE again to resume normal playback.

™The SHUFFLE flag disappears from the display.

Note:

–REPEAT DISC mode will be cancelled when shuffle is selected.

Repeat (only on remote control)

You can play the current track, a disc or all available discs repeatedly.

1Press REPEAT on the remote control to select the various repeat modes.

™“TRACK”, “DISC”, “ALL DISC” or “OFF” will be displayed.

™The REPEAT flag appears on the

display.

•The selected track, selected disc or all

available discs will now be played repeatedly until you pressÇ.

2Press REPEAT until the "OFF" mode is displayed to resume normal playback.

™The REPEAT flag disappears from the display.

Notes:

–REPEAT DISC mode is not available during program play or shuffle mode.

–You can also repeat shuffling a program.

™“TRACK“ or “PROGRAM" will be displayed.

™The REPEAT, PROG, and SHUFFLE flags appear on the display.

Untitled-60 14 12/12/00, 6:33 PM 3139 116 19381