Philips FW-C38 manual Clock, Recording from other sources, Digital Recording via Digital Out

RECORDING

English	Notes:
	– At the end of side A, flip the tapes to
	side B and repeat the procedure.
	– Dubbing of tapes is only possible from
	tape deck 1 to tape deck 2.
	– To ensure good dubbing, use tapes of
	the same length.
	– You can listen to other source while
	dubbing.

Recording from other sources

(only on tape deck 2)

CLOCK

1Press TAPE ( TAPE 1•2 ) to select tape deck 2.

2Load a blank tape into tape deck 2 with the open side downward.

3Press CD, TUNER or AUX.

•Start playback of the selected source.

4 Press RECORD to start recording.

™The REC flag starts flashing.

5Press Çto stop recording.

Notes:

–During recording, it is not possible to listen to another source.

Digital Recording via Digital Out

For CD digital recording, please refer to the Instructions Manual of the CD Recorder, digital audio equipment, etc.

20

View Clock

You can view the clock (if it is set) if the system is in Standby mode or when any sound source is selected (CD, TUNER, etc.). The clock will be displayed for about seven seconds.

•Press CLOCK•TIMER briefly.

™“10:38 PM or 22:38” (the current time in either 12- or 24-hour mode) will be displayed depending on whether you have selected 12- or 24- hour mode.

™“--:--” will be displayed if the clock is not set.

Clock Setting

The clock can be set in either 12- or 24- hour mode, e.g. “12:00 AM“ or “00:00“. Before setting the clock, you must be in the View Clock mode.

1Press CLOCK•TIMER to select clock mode.

2Press PROGRAM to select 12- and 24- hour mode.

™If 12-hour mode is selected,

“12:00“ starts flashing and the AM lights up.

™If 24-hour mode is selected, “00:00” starts flashing.

3Set the hour with àor á on the system.

4Set the minute with íor ëon the system.

Untitled-60 20 12/12/00, 6:33 PM 3139 116 19381