Philips FW-C380 manual Clock/Timer, To switch off the TIMER, To start the TIMER again for the same

Models: FW-C380

1 30
Download 30 pages 14.63 Kb
Page 27
Image 27
To switch off the TIMER

Clock/Timer

3Press à or á on the system to set the hour for the timer to start.

4Press í or ë on the system to set the minute for the timer to start.

5Press CLOCKTIMER to store the start time.

The timer is now set.

The TIMER remains on the display.

At the preset time, the timer will be activated. The selected source will be played.

Notes:

During timer setting, if no button is pressed within 90 seconds, the system will exit timer setting mode automatically.

If the source selected is TUNER, the last tuned frequency will be switched on.

If the source selected is CD, playback will begin with the first track of the selected disc or programme. If the disc trays are empty, the TUNER will be selected instead.

The timer will not activate if a recording is in progress.

To switch off the TIMER

1Press and hold CLOCKTIMER for more than 2 seconds.

2Press Ç on the system to cancel the timer.

The timer is now switched off.

The display will show "OFF" and the TIMER disappears.

To start the TIMER again (for the same

preset time and source)

1Press and hold CLOCKTIMER for more than 2 seconds.

2Press CLOCKTIMER again to store the start time.

The timer is now on.

The TIMER appears on the display.

Sleep Timer (only on remote control)

This feature allows you to select a length of time after which the system will switch to the standby mode automatically.

1Press SLEEP on the remote control repeatedly to select a period of time.

The selections are as follows (time in minutes): 15 30 45 60 OFF 15 …

"SLEEP XX" or "OFF" will be displayed. "XX" is the time in minutes.

2When you reach the desired length of time, stop pressing the SLEEP button.

The SLEEP display lights up.

The Sleep Timer is now set. Before the system switches to standby mode, a countdown of 10 seconds will be displayed.

"SLEEP 10" "SLEEP 9".... "SLEEP 1" "SLEEP"

While SLEEP mode is activated

Press SLEEP once to view the remaining length of time.

Press SLEEP twice to change the pre-selected period of time.

The display will show the remaining time followed by the sequence of sleep timer options.

To switch off the Sleep Timer

Press SLEEP repeatedly until "OFF" is displayed, or press the STANDBY-ONbutton.

English

 

 

27

pg 01-30/C380/22-Eng

27

12/7/00, 3:43 PM 3139 115 20641

Page 27
Image 27
Philips FW-C380 Clock/Timer, To switch off the TIMER, To start the TIMER again for the same, While SLEEP mode is activated