DVD Menu Operations
Setting the video out
Video Out selection enables you to choose the type of video output suitable for your DVD system.
PR PBY
SET
S-VIDEO
–Select
You can press and hold DISPLAY for more than 5 seconds to switch progressive scan ON or OFF.
Notes:
–A progressive scan TV set is required.
–The progressive scan video quality is only possible through PR PB Y output connection.
Setting the screen saver
OFF
ON
SCREEN SAVER NOW ON
English
PR PBY
–Select PR PBY if you have connected the video output to your TV system using PR PB Y jack.
Note:
–You do not need to adjust the video output setting if you are using VIDEO jack (yellow) to connect the system to your TV system.
Improving the image for progressive scan video output setting
This feature is only applicable when you have connected this system to a Progressive Scan TV system through the Component Video jacks.
OFF |
ON
SET PROGRESSIVE SCAN
Off
Select this if a conventional TV set is connected to your system.
On
To enjoy the full quality potential offered by progressive scan feature, a progressive scan TV set is required.
If set to ON, the screen saver will be activated when you leave the system in stop or pause mode for 1 mimute.The default setting is ON.
Setting the digital output
Set Digital Output according to your optional audio equipment connections.
DIGITAL OUTPUT | OFF | |
PCM OUTPUT | ALL | |
PCM ONLY | ||
| ||
NIGHT MODE |
|
CNTR DELAY
REAR DELAY
TEST TONE
SET SPDIF OFF
Off
Select this to deactivate the digital output.
All
Select this if you have connected the digital output to a piece of optional audio equipment that has a multichannel decoder.
PCM only
Select this if the external component is capable of processing digital signal input. After that, proceed to “Setting the PCM output”.
31
