Philips FW-D750 manual Selecting a preset radio station, Manual preset programming

English

Tuner Operations

Manual preset programming Changing tuning grid

1Press TUNER (BAND) repeatedly to select the desired tuner band: FM or MW.

2Press and hold 1 / ¡ on the system or 4 / ¢ on the remote control to search a radio frequency.

3Press PROGRAM.

➜ “PROG” and “P 01” will display.

4Press O / P on the system, 2 / 3 or numeric keys (0-9)on the remote control to select the desired preset number.

5After selecting an address number, press

PROGRAM again to store the radio station.

●Repeat steps 3-5to store other preset radio stations.

To stop storing the manual preset

●Press 7 on the system.

Note:

– If you attempt to store more than 40 preset radio stations,“FULL” will be displayed.

Selecting a preset radio station

●In tuner mode, press 2 or 3 or use the numeric keys (0-9)to select the desired preset number.

➜ The preset number, radio frequency, and waveband are displayed.

In some countries, the frequency step between adjacent channels in the MW band is 9 kHz (10 kHz in some areas).The preset frequency step in the factory is 9 kHz.

1Plug the AC power cord.

2Press TUNER to select MW mode.

3Press and hold 9 for more than 3 seconds when

reconnecting the system to the AC power supply.

➜ “STEP XX K” appears.

Note:

–All preset stations will be lost and need to be reprogrammed.

Deleting a preset radio station

1Press O or P to select the preset radio station to be erased.

2Press 7 on the system, “PRESET DELETED” appears on the display.

➜The radio frequency remains on the display.

➜The preset numbers of all other preset radio stations in the band with higher numbers are

also decreased by one.

●Repeat steps 1-2to erase other preset radio stations.

36