–Even though the AC power cord is removed from and reconnected to the wall socket, the demonstration will remain off until it is switched on again.
To start the demonstration mode
•Press and hold Ç(on the system only) for 5 seconds when the system is in standby mode.
™ The demonstration will begin.
Easy Set
EASY SET allows you to store all available radio stations automatically.
•Press and hold STANDBY ON (on the system only) for 5 seconds; when the system is in standby or demonstration mode.
™"EASY SET" will be displayed, and followed by "TUNER" and then "AUTO".
™EASY SET will start searching for all radio on FM band and then followed by radio stations on MW band.
™All available radio stations with sufficient signal strength will be stored. Up to 40 presets may be stored.
Notes:
–EASY SET will start with the FM band, if there are still presets available, the system will continue to store the MW band.
–When EASY SET is used, all previously stored radio stations will be replaced.
–The last preset radio station will appear on the display when EASY SET is completed.
Switching the system ON
•Press CD, TUNER, TAPE or AUX.
You can also switch on the system by pressing any one of the CD DIRECT PLAY buttons.
Switching the system to standby mode
•Press STANDBY ON or B on the remote control.
™The system will switch to standby mode.
™About five seconds later, the system will go into an energy saving mode if the demonstration mode has been disabled.
Selecting the Source
•Press the respective source selection button: CD, TUNER, TAPE or AUX.
™The display indicates the selected source.
Note:
–For an external source, make sure you have connected the audio left and right OUT terminals of the external equipment (TV, VCR, Laser Disc player, DVD player or CD Recorder) to the AUX/ CDR IN terminals.
Selecting the Equalizer
Display
You can select the desired equalizer display for the system. You must not press the DSC button on the system before using the JOG control.
•Adjust the JOG control to select the desired Equalizer Display, NORMAL, TOP DOWN, or NITE MODE.
™ The selected display will be shown.
NORMAL Display
PROGRAM |
| STEREO |
REPEAT TIMER REC |
| BACK |
NEWS T.A. AM MW FMLW |
| FRONT HSD |
60Hz 250Hz 500Hz | 1KHz | 2KHz 4KHz 8KHz |
OPERATING THE SYSTEM
TOP DOWN Display
PROGRAM |
| STEREO |
REPEAT TIMER REC |
| BACK |
NEWS T.A. AM MW FMLW |
| FRONT HSD |
60Hz 250Hz 500Hz | 1KHz | 2KHz 4KHz 8KHz |
NITE MODE Display
PROGRAM |
| STEREO |
REPEAT TIMER REC |
| BACK |
NEWS T.A. AM MW FMLW |
| FRONT HSD |
60Hz 250Hz 500Hz | 1KHz | 2KHz 4KHz 8KHz |
Note:
–In NITE MODE, all lights will be switched off and the display brightness will be dimmed.
English
13
13 | 6/8/01, 10:13 AM | 3139 116 19782 |
