English
TUNER
STANDBY
ON
CD 1
CD 2
CD 3
DISPLAY
CDR
MIC
LEVEL
DIGITAL / ANALOG
AUX
TUNER
iR SENSOR
/TIM CLOCK CD TEXT
EDITING |
|
| |
|
|
| OPEN/CLOSE |
CD RECORDER |
| ||
| RECORD |
|
|
|
|
| MASTER |
|
|
| VOLUME |
| COPY CD |
|
|
| COMPILE | CD |
|
|
|
| |
| RECTYPE |
| |
|
| ERASE | CD |
| CD |
|
|
| FINALIZE |
|
|
EDIT
2Keep PROG (PROGRAM on the remote control) pressed for more than 2 seconds.
yAutoprogram is displayed, PROG and the current preset number in the music calendar start blinking.
yAll available radio stations for the selected waveband are stored automatically. PROG goes off, the preset number, the waveband and the frequency of the last preset station are displayed briefly.
•To store radio stations for another waveband, repeat steps
•To exit the automatic programming, press PROG (PROGRAM on the remote control).
Note: Strong stations will always automatically be programmed first, followed by the weak stations.
Manual programming
MIC
Tuning to radio stations
1Press TUNER to select the tuner. yTuner is scrolled.
2Press TUNER again to select the desired waveband. yThe selected waveband is displayed.
3Keep àSEARCH or áSEARCH (àor áon the remote control) pressed for more than a half second.
yThe selected waveband and Searching are displayed. The radio tunes to a station with sufficient signal strength.
4Repeat searching until you find the desired station.
•To tune to a weak station, briefly press àSEARCH or áSEARCH (àor áon the remote control) as often as necessary for optimum reception.
Storing radio stations
It is possible to store up to 40 radio stations. Stations can be selected and programmed automatically or you can do that yourself. Programming will overwrite your former presets starting from the last active preset station. After programming the last stored preset station will be tuned.
Automatic programming
If no preset is tuned, automatic programming starts at preset number one.
1Follow steps 1 and 2 of “Tuning to radio stations”.
1Follow steps 1 and 2 of “Tuning to radio stations”.
2Keep PROG (PROGRAM on the remote control) pressed for less than 2 seconds.
yPROG and the current preset number in the music calendar start flashing.
3Press àSEARCH or áSEARCH (àor áon the remote control) to tune to the desired radio station.
•To allocate the radio station to another preset number, rotate íJOG CONTROL ë(pressíor ëon the remote control).
4Press YES to confirm the setting.
yPROG goes off, the preset number, the waveband and
the frequency of the preset station are displayed.
•To exit manual programming, press PROG (PROGRAM on the remote control).
Tuning to preset stations
•Use íJOG CONTROL ë(íor ëon the remote control) until the preset number of the desired station is displayed.
26