Clock/Timer
3Press à or á on the system to set the hour for the timer to start.
4Press í or ë on the system to set the minute for the timer to start.
5Press CLOCK•TIMER to store the start time.
➜The timer is now set.
➜The TIMER remains on the display.
¶At the preset time, the timer will be activated. ➜ The selected source will be played.
Notes:
–During timer setting, if no button is pressed within 90 seconds, the system will exit timer setting mode automatically.
–If the source selected is TUNER, the last tuned frequency will be switched on.
–If the source selected is VCD, playback will begin with the first track of the last selected disc or other trays if disc is empty. If all the disc trays are empty, the TUNER will be selected instead.
–The timer will not activate if a recording is in progress.
To switch off the TIMER
1Press and hold CLOCK•TIMER for more than two seconds.
2Press Ç on the system to cancel the timer.
➜The timer is now switched off.
➜The display will show "OFF" and the TIMER disappears.
To start the TIMER again (for the same
preset time and source)
1Press and hold CLOCK•TIMER for more than two seconds.
2Press CLOCK•TIMER again to store the start time.
➜The timer is now on.
➜The TIMER appears on the display.
E n g l i s h
Maintenance
Cleaning the Cabinet
¶Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing alcohol, spirits, ammonia or abrasives.
Cleaning Discs
¶When a disc becomes dirty,
clean it with a cleaning cloth. Wipe the disc from the centre out.
¶ Do not use solvents such as benzine, thinner, commercially
available cleaners, or antistatic
spray intended for analogue records.
Cleaning the Heads and the Tape Paths
¶To ensure good recording and playback quality, clean the heads, the capstan(s), and pressure roller(s) after every 50 hours of tape operation.
¶Use a cotton swab slightly moistened with cleaning fluid or alcohol.
¶You can also clean the heads by playing a cleaning tape once.
Demagnetizing the heads
¶Use a demagnetizing tape available at your dealer.
Cleaning the DISC lens
¶After prolonged use, dirt or dust may accumulate at the disc lens.To ensure good playback quality, clean the disc lens with Philips CD Lens Cleaner or any commercially available cleaner. Follow the instructions supplied with cleaner.
|
| 29 |
pg | 29 | 3139 115 20852 |
28/05/2001, 09:02 AM |