| CD / VCD / | |
|
|
|
E |
| Playing the programme |
ng | 1 Press PLAYÉÅto start programme playback. | |
lis |
| ➜ “PLAY PROGRAM” will be displayed. |
h |
| ➜ The track number and elapsed playing time of |
|
| |
|
| the current track will appear on the display. |
¶If you press REPEAT during programme playback, the current track or all programmed tracks will be played repeatedly.
➜"REPEAT TRACK", "REPEAT PROGRAM" or "REPEAT OFF" will be displayed.
➜The REP and PROG flags appear on the display.
2Press Ç to stop programme playback.
Note:
– If you press any other DISC DIRECT PLAY buttons, the system will play the selected disc and the stored programme will be cleared.
Erasing the programme (when playback is stopped)
¶Press Ç.
➜ “PROGRAM CLEARED” will be displayed.
Note:
–The programme will be erased when the system is disconnected from the power supply or switched to standby mode or other sources or when you change the programme disc.
Repeat (only on remote control)
You can play the current track or a disc repeatedly.
1Press REPEAT on the remote control to select the various repeat modes.
➜"REPEAT TRACK", "REPEAT DISC"or "REPEAT OFF" will be displayed.
➜The REP flag appears on the display.
¶The current track or disc will now be played repeatedly until you pressÇ.
2Press REPEAT until the "REPEAT OFF" mode is displayed to resume normal playback.
➜ The REP flag disappears from the display.
Notes:
–REPEAT DISC mode is not available during programme play mode.
18
pg | 18 |
VIDEO CD
OSD | 2 |
VCD.CD 1/2/3 AUX TUNER TAPE 1/2 |
1 | 2 |
| 3 |
4 | 5 |
| 6 |
7 | 8 |
| 9 |
PROG | 0 | REPEAT | |
| VOLUME |
|
|
| ÉÅ |
|
|
TITLE |
|
| TITLE |
- í |
| ë | + |
àÇ á
ALBUM | IS | ALBUM |
- | + |
DBBDSC
PBC RETURN DIGEST
ZOOM RESUME SLOW
Ö
VOCALECHO
- +
KEY CONTROL
#
Adjusting the TV System
Before viewing the Video CD, ensure that the set is switched to corresponding PAL or NTSC system of your TV set (exception Multi – system TV).
●Press and hold PAL/NTSC for more than 2 seconds to switch between PAL or NTSC TV system.
➜ After TV system is selected, the set will automatically switch to the last TV system setting every time the VCD source is selected.
Note:
–Before adjusting the TV system, make sure that there is no
OSD – On Screen Display
If you insert VCD/CD, your TV screen will serve as an additional display for messages (e.g. PLAY, STOP), and information stored on the VCD/CD.
●Press OSD on the remote control repeatedly to switch ON or OFF.
When OSD is switched ON; you can see the following display on the TV screen.
Below is an example of the OSD message.
3139 115 20852
28/05/2001, 09:02 AM