Radio Reception
English |
Tuning to radio stations
1Press TUNER to select TUNER mode.
➜"TUNER" is displayed. A few seconds later, the current radio frequency will appear on the display.
➜If an FM station is received in stereo, 
is displayed.
2Press TUNER again to select the desired waveband : FM or MW.
3Press and hold à or á until the frequency indication starts to change, then release.
➜The display will show "SEARCH" until a radio station with sufficient signal strength is found.
4Repeat step 3 if necessary until you find the desired radio station.
●To tune to a weak station, press à or á briefly and repeatedly until optimal reception found.
Storing preset radio stations
You can store up to 40 preset radio stations in the memory.
Automatic Preset Programming
●Plug and Play setting (refer to “Basic Functions - Plug and Play”).
OR
1Press TUNER to select TUNER mode.
To begin automatic preset from a desired
preset number
●Press í or ë to select the desired preset number.
➜ If a radio station has been stored in one of the presets, it will not be stored again under another preset number.
2Press and hold PROG until "AUTO" is displayed.
➜PROG starts flashing.
➜All available radio stations with sufficient signal strength will be stored automatically, starting from FM and followed by MW band.
➜When all the available radio stations are stored or the memory for 40 presets are used, the last preset radio station will be played.
To stop storing the automatic preset
●Press PROG or Ç on the system.
Note:
– If no preset number is selected, automatic preset will begin from preset (1) and all your former presets will be overridden.
24
