Specifications
E n g l i s h
AMPLIFIER |
|
|
Output power | 800 W PMPO | |
........................................................................ | 2 x 20 W RMS | |
≥ 67 dBA (IEC) | ||
Frequency response | 50 – 15000 Hz | |
Input sensitivity |
|
|
AUX/CDR In | 500 mV / 1V | |
Microphone | 3.5 mV | |
Output |
|
|
Speakers | ≥ 6 Ω | |
Headphones | 32 Ω – 1000 Ω | |
(1) (6 Ω, 1 kHz, 10% THD) |
|
|
|
| |
Number of programmable tracks | ......................... 99 | |
Frequency range | 20 – 20000 Hz | |
≥ 80 dBA | ||
Channel separation | ≥ 60 dB (1 kHz) | |
Total harmonic distortion | < 0.003% | |
MPEG 1 | VCD version 2.0 | |
MPEG 1 Layer 3 | MPEG AUDIO | |
| (128 kbps advised) | |
Sampling frequencies | 32, 44.1, 48 kHz | |
RADIO RECEPTION |
|
|
FM wave range | 87.5 – 108 MHz | |
MW wave range (9 kHz) | 531 – 1602 kHz | |
MW wave range (10 kHz) | 530 – 1700 kHz | |
Tuning grid | 9/10 kHz | |
Number of presets | 40 | |
Antenna |
|
|
FM | 75 Ω wire | |
AM | Loop antenna | |
TAPE DECK |
|
Frequency response |
|
Normal tape (type I) | ...... 80 – 12500 Hz (8 dB) |
| |
Normal tape (type I) | ................................ ≥ 48 dBA |
Wow and flutter | ≤ 0.4% DIN |
SPEAKERS |
|
System | double port bass reflex |
Impedance | 6 Ω |
Woofer | 1 x 4" full range |
Dimensions (w x h x d) . 210 x 310 x 235 (mm)
Weight | 2.9 kg each | |
GENERAL INFORMATION | ||
Material | Polystyrene | |
AC Power | 110 – 127 / 220 – 240 V; | |
....................................................... | 50/60 Hz Switchable | |
Power Consumption |
|
|
Active | 35 W | |
Standby | < 15 W | |
Dimensions (w x h x d) | .... 265x 310x 365 (mm) | |
Weight (without speakers) | ................................. 5.8 kg | |
Specifications and external appearance are subject to change without notice.
32
