| CD / VCD / |
|
|
English | Erasing the program (when |
playback is stopped) | |
| • Press Ç. |
| ™ “PROGRAM CLEARED” will be |
| displayed. |
Note:
–The program will be erased when the system is disconnected from the power supply. The system is switched to standby mode when you change source or when you change the program disc.
Repeat (only on remote control)
You can play the current track or the current disc repeatedly during playback.
1Press REPEAT on the remote control to select the various repeat modes.
™“TRACK”, “DISC”or “OFF” will be displayed.
™The REPEAT appears on the display.
• The current track or disc will now be played repeatedly until you pressÇ.
2Press REPEAT until the "OFF" mode is displayed to resume normal playback.
™The REPEAT disappears from the display.
16
VIDEO CD
Adjusting the TV System
Before viewing the Video CD, ensure that the set is switched to corresponding PAL or NTSC system of your TV set (exception
•Press and hold VCD for more than 2 seconds to switch between PAL or NTSC TV system.
™After TV system is selected, the set will automatically switch to the last TV system setting everytime the VCD source is selected.
Note:
–Before adjusting the TV system, make sure that there is not
OSD - On Screen Display
If you insert one or more VCDs/CDs, your TV screen will serve as an additional display for messages (e.g. PLAY, STOP), and information stored on the VCD/CD.
•Press OSD on the remote control repeatedly to switch ON or OFF.
When OSD is switched ON; you can see the following display on the TV screen.
Below is an example of the OSD message.
SINGLE ELAPSED
PLAY XX/TT MM:SS
Notes:
–"XX" is the current track.
–"TT" is the total tracks.
–"MM" is in minutes.
–"SS" is in seconds.
When OSD is switched off; there is no information indicated on the TV screen.
Playing a Video CD with PBC
VCDs with PBC (Play Back Control) will be indicated on the display of the set and on your TV screen as soon as they are inserted. PBC is a predefined play sequence stored on the VCD.
1Switch on the TV, insert a VCD with PBC and press ÉÅto start playback.
2MENU appears on the TV screen.
If a menu consists of a list of titles you can select a sequence directly.
1Select your choice with the digit keys 0 - 9 on the remote control. The VCD starts playing of the selected sequence automatically.
2Press RETURN ( 
) to go back to the previous menu.
Note:
–If a menu consists of more than one page, it is possible to go through the pages with PREV./NEXT on the set or remote control.
Switching off PBC
•It is possible to switch off PBC in STOP mode by pressing the PBC button. Now this VCD can be treated like a normal VCD.
™The TV display will show
<PBC OFF > .
Notes:
–In PBC mode PROGRAM is not active.
–The MENU structure depends on the program stored on the VCD. Please refer to the information supplied with the disc.
Slow
1Press SLOW on the remote control to watch a VCD in a slow speed. There are 3 types of slow modes to select.
™"SLOW 1" , "SLOW 2" or
"SLOW 3" appears on the TV screen.
2PressÉÅ again to resume playback at normal speed.
Note:
–Audio is muted in Slow mode.
pg | 16 | 6/8/01, 9:11 AM | 3139 115 20042 |
