Philips FW-V55 Discs for playback, Loading the Disc Changer, Disc Direct Play, For MP3-CDonly

Models: FW-V55

1 28
Download 28 pages 36.94 Kb
Page 14
Image 14
Discs for playback

English

14

CD / VCD / MP3-CD

Discs for playback

This system can playback all audio CD, finalized audio CD-Recorder and MP3-CD format discs.

Note:

For mixed mode discs, only one mode will be selected for playback depending on the recording format.

Loading the Disc Changer

1Press VCD to select VCD/CD/MP3-CD mode.

2Press OPEN•CLOSE.

The disc carousel tray slides out.

3Load a disc with the printed side up in

the right tray.

You can load another disc in the left tray.

To load the third disc, press the DISC CHANGE button.

The disc carousel tray will rotate until the empty tray is ready for loading.

Playback will always start with the disc in the inner disc tray.

4Press OPEN•CLOSE to close the disc carousel tray.

The total number of tracks and the playing time of the last selected disc appear on the display.

For MP3-CD only:

The first Album and the first Title information appear on the display.

Notes:

To ensure good system performance, wait until the disc changer completely reads the disc(s) before proceeding.

For MP3-CD, the disc reading time may exceed 10 seconds due to the large number of songs compiled into one disc.

Disc Direct Play

You can play a disc directly by pressing the DISC 1, DISC 2 or DISC 3 button.

Playing a normal disc

For normal VCD:

Ensure that the system is switched to the corresponding PAL or NTSC system of your TV set (except multi- system TV).

1Press PLAYÉÅ to start playback.

The disc tray, track number and elapsed playing time of the current track appear on the display.

To interrupt playback, press PAUSE

ÉÅ.

The playing time flashes.

To resume playback, press PLAYÉÅ again.

2To stop playback, press Ç.

Note:

During Disc Reading mode, if you press any button, "PLEASE WAIT" will be displayed.

Disc Change

You can change the outer two discs while the third inner disc is stopped or is playing.

1Press DISC CHANGE.

The disc carousel tray slides out.

2Replace the discs in the left and right disc trays.

If you press DISC CHANGE again

during playback, the disc will stop playing.

The disc carousel tray will rotate until the inner tray is rotated out and is ready for changing.

3Press OPEN•CLOSE to close the disc carousel tray.

Selecting a desired track

Selecting a desired track when playback is stopped

Press digit 0 – 9 on the remote control to select the desired track.

Playback will start immediately for the selected track.

The selected track number and elapsed playing time appear on the display.

Selecting a desired track during playback

Press íor ë(or digit 0-9on the remote control) until the desired track appears on the display.

The selected track number and elapsed playing time appear on the display.

If you press íonce it will skip to the beginning of the previous track and play the track.

For MP3-CD only

1Press ALBUM -/+(àorá) until the desired Album appears on the display (when playback is stopped).

2Press TITLE -/+(íor ë) until the desired Title appears on the display.

The selected track number and elapsed playing time appear on the display.

3Press PLAYÉÅ to start playback.

pg 01-28/V55/21-En

14

6/8/01, 9:11 AM

3139 115 20042

Page 14
Image 14
Philips FW-V55 manual Discs for playback, Loading the Disc Changer, Disc Direct Play, Playing a normal disc, For MP3-CDonly