LG Electronics 42PX7DC Connection Option, VCR Rear, How to connect, How to use, Plasma TV

VCR Setup

-To avoid picture noise (interference), leave an adequate distance between the VCR and TV

-Use the ISM Method (on the Option menu) feature to avoid having a fixed image remain on the screen for a long period of time. If the 4:3 picture format is used; the fixed images on the sides of the screen may remain visible on the screen.

Connection Option 1

Set VCR output switch to channel 3 or 4 and then tune the TV to the same channel number.

Connection Option 2
1. Connect the audio and video cables from the					or
VCR's output jacks to the TV input jacks, as	2	ANTENTENNANA	IN	M.P.I
shown in the figure.
When connecting the TV to VCR, match the
jack colors (Video = yellow, Audio Left = white,
and Audio Right = red).
If you connect an S-VIDEO output from VCR to
the S-VIDEO input, the picture quality is
improved; compared to connecting a regular
VCR to the Video input.
2. Insert a video tape into the VCR and press
PLAY on the VCR. (Refer to the VCR owner’s				1
manual.)								2
3. Select the input source with using the INPUT
button on the remote control. Note that this TV
finds the connected input sources automatically					ANT OUT
for AV1, AV2 and Component . It is presumed					S-VIDEO		OUT	VCR Rear
that RGB1-2 , HDMI1/DVI and HDMI2 sources					ANT IN
					OUTPUT		VIDEO	(R) AUDIO (L)
are connected.					SWITCH
					3	4	IN

Do not connect to both Video and

S-Video at the same time.

External A/V Source Setup

How to connect

Connect the audio and video cables from the external equip- ment's output jacks to the TV input jacks, as shown in the figure.

When connecting the TV to external equipment, match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red).

How to use

1.Select the input source with using the INPUT button on the remote control.

2.Operate the corresponding external equipment.

VIDEO L/MONO AUDIO R

Camcorder

R AUDIO L VIDEO

Video Game Device

14 Plasma TV