CLOCKTIMER
5Press CLOCK/TIMER again to store the setting.
™ The clock starts.
•To exit without storing the setting, press Ç on the system.
Notes:
–During clock setting, if no button is pressed within 90 seconds, the system will exit clock setting mode automatically.
–When a power interruption occurs, the clock setting is erased.
Timer Setting
•The system can switch on to VCD, TUNER, or TAPE 2 mode automatically at a preset time. It can serve as an alarm to wake you up.
•Before setting the timer, make sure the clock is set correctly.
•The timer will always be switched on once it is set.
•The volume of the timer will increase from the minimum level until the volume level before the set is switched to standby mode.
1Press and hold CLOCK/TIMER for more than 2 seconds to select timer mode.
™“ AM 12:00” or “00:00" or the last timer setting starts flashing depending on whether you have selected 12- or
™The TIMER starts flashing.
™The selected source is lit while other available sources are flashing.
2Press VCD, TUNER or TAPE to select
the desired source.
•Before selecting VCD or TAPE, make
sure a disc or tape is loaded in the disc tray or tape deck 2.
3Press àor á on the system to set the hour for the timer to start.
4Press íor ë on the system to set the minute for the timer to start.
5Press CLOCK/TIMER to store the start time.
™The timer is now set.
™The TIMER remains on the display.
• At the preset time, the timer will be activated.
™The selected source will be played.
Notes:
–During timer setting, if no button is pressed within 90 seconds, the system will exit timer setting mode automatically.
–If the source selected is TUNER, the last tuned frequency will be switched on.
–If the source selected is VCD, playback will begin with the first track of the disc tray 1 or other trays if disc tray 1 is empty. If all the disc trays are empty, the TUNER will be selected instead.
–If the source selected is TAPE, and if the preset time is reached during high speed dubbing, the TUNER will be selected instead.
–The timer will not activate if a recording is in progress.
To switch off the TIMER
1Press and hold CLOCK/TIMER for more than 2 seconds.
2Press Çon the system to cancel the timer.
™The timer is now switched off.
™The display will show "OFF" and the TIMER disappears.
To start the TIMER again (for the same preset time and source)
1Press and hold CLOCK/TIMER for more than 2 seconds.
2Press CLOCK/TIMER again to store the start time.
™The timer is now on.
™The TIMER appears on the display.
English
25
pg | 25 | 6/8/01, 9:12 AM | 3139 115 20042 |
