Philips FW386C, FW65C, FW380C manual Timer Setting, View Clock, Clock Setting

English

CLOCK

							RDS	NEWS!
OPTIMAL	JAZZ	STEREO	REC	DBB	I S
		NEWS	HSD	LW	AM PM
		REPLAY FM	MW			MAX	CLOCK	PROGRAM
DSC	DBB						TIMER
		REPEAT SHUFFLE
TECHNO	ROCK	PROGRAMTIMER
DIGITAL SOUND CONTROL							MASTER VOLUME
	CD	TUNER			TAPE		AUX
STANDBY.ON	CD 1• 2 • 3	BAND			TAPE 1 • 2		VIDEO

DUBBING	TUNING	▲ ▲	DEMO				PRESET ▲
▲ ▲						▲
DUBBING							n
• FAST
• NORMAL
NORMA•HIGH RECORD REPLAY							MIC LEVEL
	SEARCH		STOP•CLEAR	PLAY	PAUSE	PREV	NEXT

•MAX

TIMER

Notes:

–During clock setting, if no button is pressed within 90 seconds, the system will exit clock setting mode automatically.

–When a power interruption occurs, the clock setting is erased.

Timer Setting

•	The system can switch on to CD or TUNER mode
	automatically at a preset time. It can serve as an alarm
	to wake you up. After half an hour from the preset time,
	the system will return to the standby mode if no button
	is pressed.
•	Before setting the timer, make sure the clock is set
	correctly.
•	The timer has to be reset or start again for each
	subsequent preset time.
•	The volume of the timer will be at the last setting

View Clock

You can view the clock (if it is set) at standby or any source mode. It will be displayed for about 7 seconds.

•Press CLOCK•TIMER briefly.

ª“10:25 PM” (the current time) will be displayed.

ª“--:--” will be displayed if the clock is not set.

Clock Setting

The clock is set in 12-hour mode, e.g. “12:00 AM“ or “12:00 PM“. Before setting the clock, you must be in the View Clock mode.

1Press CLOCK•TIMER to select clock mode.

ª“12:00 AM” or the current time starts flashing.

ª“ˆ, ‡, ’, ‘, ‚” light up.

2Set the hour withʈor ‡.

3Set the minute withÊ’or ‘.

4Press CLOCK•TIMER again to store the setting.

ªThe clock starts running.

• To exit without storing the setting, press ‚.

before the set is switched to standby mode.

1Press and hold CLOCK•TIMER for more than 2 seconds to select timer mode.

ª“ON 12:00 AM” or the last set timer starts flashing. The TIMER flag flashes.

ªThe last selected source is lighted while other available sources are flashing.

ª“ˆ, ‡, ’, ‘, ‚” light up.

2Press CD or TUNER to select the desired source.

3Pressʈor ‡to set the hour for the timer to start.

4PressÊ’or ‘to set the minute for the timer to start.

5Press CLOCK•TIMER to store the start time.

ªThe TIMER is now set.

ªThe TIMER flag remains on the display.

• To exit without storing the setting, press ‚.

24