TIMER
•At the preset time, the TIMER will be activated.
ªThe selected source will be played.
ªThe TIMER flag disappears from the display.
Notes:
–During timer setting, if no button is pressed within 90 seconds, the system will exit timer setting mode automatically.
–If the source selected is TUNER, the last tuned frequency will be switched on.
–If the source selected is CD, playback will begin with the first track of the last selected disc. If the CD trays are empty, the TUNER will be selected instead.
To cancel the TIMER
1Press CLOCK•TIMER for more than 2 seconds.
2Press •to cancel the timer.
ª“CANCEL” will be displayed.
ªThe TIMER flag disappears from the display.
To start the TIMER again (for the same time)
1Press CLOCK•TIMER for more than 2 seconds.
2Press CLOCK•TIMER again to store the start time and the selected source.
MAINTENANCE
Maintenance
Cleaning the Cabinet
•Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing alcohol, spirits, ammonia or abrasives.
Cleaning Discs
• When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the center out.
• Do not use solvents such as benzine, thinner, commercially available cleaners, or antistatic spray intended for analog records.
Cleaning the CD lens
•After prolonged usage, dirt or dust may accumulate at the CD lens. To ensure good playback quality, clean the CD lens with Philips Magnavox CD Lens Cleaner or any commercially available. Follow the instructions supplied with the Lens Cleaner.
Cleaning the Heads and the Tape Paths
•To ensure good recording and playback quality, clean the heads, the capstan(s), and pressure roller(s) after every 50 hours of tape operation.
•Use a cotton swab slightly moistened with cleaning fluid or alcohol.
•You can also clean the heads by playing a cleaning tape through once.
Demagnetizing the heads
• Use a demagnetizing tape available at your dealer.
English
25
