Radio Reception, Tuning to radio stations

Radio Reception

NEWS

	Tuning to radio stations			To begin automatic preset from a desired
1	Press TUNER to select TUNER mode.			preset number
			●	Press í or ë to select the desired preset
	➜ "TUNER" is displayed. A few seconds later, the			number.
	current radio frequency will appear on the			➜ If a radio station has been stored in one of
	display.			the presets, it will not be stored again under
2	Press TUNER again to select the desired			another preset number.
	waveband : FM, MW or LW.		2	Press and hold PROGRAM until "	AUTO
					" is
3	Press and hold à or á until the frequency			displayed.
	indication starts to change, then release.			➜ PROG starts flashing.
	➜ The display will show "	SEARCH		➜ The system will automatically store the radio
		" until a radio		stations with sufficient signal strength, starting
	station with sufficient signal strength is found.
4	Repeat step 3 if necessary until you find the			from all RDS stations and followed by FM, MW
				and LW bands respectively. Weak RDS stations
	desired radio station.
				may be stored in later presets.
●	To tune to a weak station, press à or á briefly
				➜ When all the available radio stations are
	and repeatedly until optimal reception found.
				stored or the memory for 40 presets are used,

				the last preset radio station (or the first available
	Storing preset radio stations			RDS station) will be played.
	You can store up to 40 preset radio stations in			To stop storing the automatic preset
	the memory.

●Press PROGRAM or Ç on the system.

	Automatic Preset Programming	Note:
	● Plug and Play setting (refer to “Basic Functions -
		– If no preset number is selected, automatic preset
	Plug and Play”).
		will begin from preset (1) and all your former
	OR
		presets will be overridden.

1 Press TUNER to select TUNER mode.