Philips FWM399 manual View clock, Clock setting, To exit without storing the setting, Clock/Timer

Clock/Timer

English

IMPORTANT!

–When in Eco Power standby mode, it is not possible to operate the clock or timer function.

–Use CLOCK•TIMER on the set to set the clock and timer.

–CLK•TIMER on the remote control allows you to view the times only.

View clock

The clock (if it is set) will be shown in standby mode.

To view the clock in any source mode (CD or TUNER for example)

●Press CLOCK•TIMER (or CLK•TIMER on the remote control).

➜The clock is displayed for a few seconds.

➜If the clock has not been set, "--:--" is displayed.

Clock setting

The clock can be set in either 12-hour or

24-hour mode ("AM 12:00" or "00:00" for example)

1In standby or view clock mode, press

CLOCK•TIMER once. In other source mode, press CLOCK•TIMER twice.

2Press PROGRAM repeatedly to select clock mode.

➜ "AM 12:00" or "00:00" starts flashing.

3Press à or á on the system repeatedly to set the hour.

4Press í or ë on the system repeatedly to set the minute.

5Press CLOCK•TIMER again to store the setting.

➜ The clock starts working.

To exit without storing the setting

●Press Çon the system.

Notes:

–The clock setting will be cancelled when the power cord is disconnected or if a power failure occurs.

–During clock setting, if no button is pressed within 90 seconds, the system will exit clock setting mode automatically.

–To set the clock automatically through the time information in the RDS signal, refer to "Radio Reception - Setting the RDS clock".

25