Tape Operation/Recording
English
CD Synchronised start recording
1Press CD to select the disc.
●Press í or ë to select the desired track to start recording.
●You can programme the tracks in the order you want them to be recorded (refer to “CD Operation - Programming the disc tracks”).
2Press RECORD to start recording.
➜ The disc will start playback automatically.
To stop recording
●Press Ç.
➜ Recording and disc playback will stop simultaneously.
Dubbing tapes
1Load the prerecorded tape in tape deck 1.
●You can set the tape to the desired passage where recording will start.
2Press DUBBING.
➜Playing and recording will start simultaneously.
➜"DUB" is displayed.
●Dubbing of tapes is possible on one side of the tape only. To continue recording on the reverse side, at the end of side A, flip the tape to side B and repeat the procedure.
To stop dubbing
●Press Ç.
Notes:
–Dubbing of tapes is possible only from tape deck 1 to tape deck 2.
–To ensure good dubbing, use tapes of the same length.
External Sources
Note:
– All the sound control features (DSC or DBB, for example) are available for selection.
– Refer to the operating instructions for the connected equipment for details.
For Recording, please refer to “Tape
Operation/Recording”.
Listening to external sources
1Connect the audio out terminals of the external equipment (TV,VCR, Laser Disc player, DVD player or CD Recorder) to the AUX/CDR IN terminals of your system.
2Press AUX to select external equipment. ➜ "AUX" or "CDR" is displayed.
24
