![Adjust the sound level](/images/new-backgrounds/19963/1996323x1.webp)
Dolby Pro Logic
E n g l i s h
➜"TEST TONE" followed by "ADAPT BALANCE, CENTER AND REAR LEVEL" will be displayed.
➜The test signal will last for about 90 seconds.
Adjust the sound level
-+ -
Front speakers
●Press BALANCE L on the remote control for left speaker and press BALANCE R on the remote control for right speaker.
➜ "BAL L +XX" or "BAL R +XX" will be displayed.
Center speaker
●Press CENTER +or - on the remote control.
➜ "CENT +XX" or
Surround speakers
●Press REAR + or - on the remote control.
➜ "REAR +XX" or "REAR
To switch off the TEST TONE
●Press TEST TONE and then DPL on the remote control.
Notes:
–It is advisable to set the speakers’ level at normal listening level.
–"XX" denotes the sound level.
Dolby Surround |
|
|
|
|
This setting is for a full |
| L | C | R RIGHT |
Dolby Surround Pro | LEFT | |||
Logic mode. |
|
| CENTER |
|
| S | SURROUND | S | |
➜ “DOLBY SURROUND” |
| |||
| SPEAKERS | |||
|
|
| ||
|
|
|
| |
will be displayed. |
|
|
|
|
Dolby Center Phantom |
|
|
| |
This setting is for use |
|
|
|
|
without the center |
| L | C | R |
speaker. It redistributes | LEFT |
|
| RIGHT |
|
| CENTER |
| |
| S |
| S | |
the center speaker |
| SURROUND | ||
| SPEAKERS | |||
|
|
| ||
|
|
|
| |
sound to the left and |
|
|
|
|
right speakers, providing conventional stereo | ||||
across the front. |
|
|
|
|
➜“DOLBY CENTER PHANTOM” will be displayed.
Dolby 3 Stereo |
|
|
| |
Use this setting when full |
|
|
| |
surround is not required, LEFT L C | R RIGHT | |||
but a wide stereo sound |
| CENTER |
| |
S | SURROUND | S | ||
is desired. It requires | ||||
SPEAKERS | ||||
|
| |||
|
|
| ||
only the left, right and center speakers. |
|
➜“DOLBY 3 STEREO” will be displayed.
Normal Stereo |
|
|
|
This setting is for normal |
|
|
|
stereo sound without | LEFT L | C | R RIGHT |
Dolby Pro Logic. It | S | CENTER | S |
requires only the left and | SURROUND | ||
| SPEAKERS |
| |
right speakers. |
|
|
|
➜ “STEREO” will be displayed. |
|
|
Switching the Dolby Pro Logic
●Press PRO LOGIC (DPL) repeatedly to select and cycle through the various sound modes.
➜ The Dolby Pro Logic display panel will light up with the selection.
PRO LOGIC |
Dolby Surround ➜ Dolby Center Phantom
➜Dolby 3 Stereo ➜ Stereo ➜ Dolby
Surround …
12
pg | 12 | 3/7/01, 4:12 PM | 3139 115 20621 |