VIDEO CD
English
Adjusting the TV System
Before viewing the Video CD, ensure that the set is switched to corresponding PAL or NTSC system of your TV set (except MultiÐsystem TV).
●Press and hold PAL/NTSC on the remote control for more than 3 seconds to switch between PAL or NTSC TV system.
OSD – On Screen Display
If you insert a VCD/ CD/ MP3 disc, your TV screen will serve as an additional display for messages (e.g. PLAY, STOP), and information stored on the VCD.
●Press DISPLAY (OSD) on the remote control repeatedly to switch on or off the On Screen Display.
When OSD is switched ON, you can see the following display on the TV screen.
Below is an example of the OSD message.
ÐElapsed playback time of current track
ÐRemaining playback time of current track
ÐTotal remaining time of current disc
ÐOFF
SINGLE REMAIN
Ð"XX" is the current track.
Ð"MM" is in minutes.
Ð"SS" is in seconds.
Note:
–You can also view the information from an
Playing a Video CD with PBC
VCD with PBC (Playback Control) will be indicated on the display of the set as soon as the disc is inserted. PBC is a predefined play sequence stored in the VCD.
1Switch on the TV, insert a VCD with PBC and press ÉÅto start playback.
2A menu appears on the TV screen.
If the menu consists of a list of titles, you can select a sequence directly
●Use the Numeric Keypad
➜ The VCD starts to play in the selected sequence automatically.
Switching off PBC
●Press PBC on the remote control.
➜ ÒPBC OFFÓ appears on the TV screen.
Notes:
–The programme mode is not available whenever the PBC mode is switched on.
–The menu structure depends on the information stored on the VCD. Please refer to the information supplied with the disc.
–PBC will be set to OFF if 9 is pressed.To play the same VCD with PBC on, please press PBC on the remote control again.
Return
●Press RETURN to return to the previous VCD disc MENU level. PBC mode must be switched on.
16
