Clock/Timer |
English |
View clock
The clock (if it is set) will be shown in standby mode.
To view the clock in any source mode (CD or TUNER for example)
●Press CLOCK•TIMER (CLOCK SET on the remote).
➜The clock is displayed for a few seconds.
➜If the clock has not been set,
Clock setting
1In standby or view clock mode, press CLOCK•TIMER (CLOCK SET on the remote) once. In other source mode, press CLOCK•TIMER (CLOCK SET on the remote) twice.
➜The clock digits flash on the display panel.
➜If the clock has not been set,
2Press
3Press
4Press CLOCK•TIMER (CLOCK SET on the remote) again to store the setting.
➜ The clock starts working.
To exit without storing the setting
●Press Çon the system.
Notes:
–The clock setting will be cancelled when the power cord is disconnected or if a power failure occurs.
–During clock setting, if no button is pressed within 20 seconds, the system will exit clock setting mode automatically.
Timer setting
The system can switch on to CD or TUNER mode automatically at a preset time, serving as an alarm to wake you up.
IMPORTANT!
– Before setting the timer, ensure that the clock is set correctly.
1 In standby mode, press and hold CLOCK•TIMER for more than two seconds (or press TIMER on the remote) to select timer mode.
➜ The current source and timer digits flash on the display panel.
➜ If the timer has not been set before,
21
