English

Clock/Timer

2Press CD orTUNER to select the desired source.

Before setting timer, make sure the music source has been prepared.

CD Ð load the disc.

TUNER Ð tune to the desired radio station.

3Press ALBUM-/+1/¡ (ALBUM 3/4 on the remote) repeatedly to set the hour for the timer to start.

4Press TITLE-/+í/ë (4 / ¢ on the remote) repeatedly to set the minute for the timer to start.

5Press CLOCK•TIMER (TIMER on the remote) to store the start time.

remains on the display.

At the preset time, the selected source will play.

To exit without storing the setting

Press Çon the system.

Note:

– During timer setting, if no button is pressed within 20 seconds, the system will exit timer setting mode automatically.

Sleep timer setting

The sleep timer enables the system to switch off by itself after a set period of time.

1Press SLEEP on the remote control repeatedly to select a preset time.

The selections are as follows (time in minutes):

OFF15 30 45 60 90120

"SLEEP XX" or "SLEEP OFF" is displayed.

"XX" is the time in minutes.

2When you reach the desired length of time, stop pressing the SLEEP button.

To deactivate the sleep timer

Press SLEEP repeatedly until "SLEEP OFF" is displayed, or press the STANDBY ON y button.

Note:

will start flashing when the remaining length of time after activation of the sleep timer is

less than 10 seconds.

22

Page 22
Image 22
Philips FWV182 manual Clock/Timer, Sleep timer setting, To deactivate the sleep timer