Philips FWV182 manual Text display and ID3 Text, Programming the disc tracks, Erasing the program

CD/VCD/MP3-CD Operation

●You can also press STOP 9 to cancel your play mode.

Text display and ID3 Text

In CD mode

●Press DISPLAY (OSD) repeatedly to see the following information on the display panel.

➜Elapsed play time of current track.

➜Remaining play time of current track.

➜Total remaining play time.

In MP3-CD mode

This feature is used to display the ID3 information for MP3-CD.

●Press DISPLAY (OSD) repeatedly to display the ID3 Text (if available) on the TV screen.

Programming the disc tracks

Programming tracks is possible when playback is stopped. Up to 20 tracks can be stored in the memory in any order.

1In the disc mode and when disc playback is stopped, press PROGRAM (PROG on the remote) to start programming.

➜For VCD/CD, PROG flashes.

➜For MP3-CD, an album and title numbers are shown and PROG flashes.

2Press TITLE-/+í/ë (4 / ¢ on the remote) repeatedly (or use the Numeric

Keypad (0-9)on the remote control) to select the desired track.

●For MP3-CD, press ALBUM-/+1/¡

(ALBUM 3/4 on the remote) and TITLE-/+í/ë (4 / ¢ on the remote) repeatedly (or use the Numeric Keypad (0-9)on the remote control) to select the desired Album and Title for programming.

3Press PROGRAM (PROG on the remote) to

store the track.

●Repeat steps 1–3to store other tracks.

4 Press ÉÅto start programme playback.

●To end programming without starting playback, press Ç once.

Notes:

–Programme cannot be used for VCDs when PBC is switched on. Switch off PBC before storing tracks.

–If you attempt to programme more than 20 tracks, "FULL" will be displayed.

To review the programme

●Stop playback and press TITLE-/+í/ë (4 / ¢ on the remote) repeatedly.

●To exit review mode, press Ç.

Erasing the program

You can erase the program by:

●pressing 9 twice during playback;

●opening the CD compartment;

●change to other source.

Playing a mixed mode disc

This set can play a mixed mode disc.

Ðmixture of audio CD and MP3-CD

Ðmixture of other combination may not be operated normally.

1As default, audio CD tracks will be read first.

2Press MIX/SEL on the remote control

repeatedly to select other disc modes.

●MP3-CD:

➜MP3 is displayed.

➜On the TV screen, an MP3 menu is displayed.

Note :

For protected CDs, “MIX CD-DA” is displayed on your TV screen even if the disc does not have other format. The MIX/SEL normal functions are not available for protected CDs.

English

15