◗The shaving foil is very delicate and should not be handled.
◗If foil becomes damaged, replace it. Do not apply pressure to shaving foil.
5Do not clean the foil with the brush, as this may cause damage.
6Place the attachment back on the Groomer or place it in the storage stand.
Rinsable Attachments
◗If preferred your Groomer trimming
attachments (See Features 
) can also be rinsed clean after each use.
1Remove any attachment from groomer and rinse attachment only thoroughly under warm tap water(fig.29).
Never rinse attachments that are still attached to the Groomer.
2Shake excess water from attachment (fig. 30) and allow to dry thoroughly.
Do not use a towel to air dry the mini shaver as damage to the shaving foil could occur.
3Place the attachment back on the Groomer or place it in the storage stand.
This Groomer has no other
Storage
◗Be sure Groomer is turned OFF. Remove cord from outlet and Groomer before storing in a safe, dry location where it will not be crushed, banged, or subject to damage.
◗Store the Groomer and attachments in the storage stand to prevent damage.
◗Do not wrap cord around Groomer or stand when storing.
◗Store cord in a safe location where it will not be cut or damaged.
◗Do not place or store Groomer where it can fall or be pulled into a tub or sink, water or other liquid while plugged in.
Replacing Trimmer Cutting Unit
If your cutters become damaged or worn, do not continue using the Groomer. Cutters should be replaced immediately by the Philips Norelco Service Location.
