Shaving With Mini Shaver
Attachment
1Put the mini shaver attachment on the groomer (fig. 18).
2Use the narrow mini shaver to shave along contoured edges to remove any stubble while creating a smooth, well- defined beard line.
Before using the mini shaver, always check it for wear and damage. If the mini shaver shows signs of wear or damage, do not use it as injury may occur. Do not use the mini shaver until it has been replaced.
Gently press the mini shaver onto the skin. Do not press too hard.
Hair Clipping
◗Make sure that the appliance is fully charged before you start clipping hair. The appliance will not operate while cord is connected to electrical outlet.
◗Before you start clipping, make sure that the head of the person whose hair you are cutting is at the same level as your chest so that all parts of his/her head are clearly visible and within easy reach.
◗Only use the appliance on dry hair.
◗Do not use on freshly washed hair.
◗Before you begin,comb the hair in the direction of growth.
◗To achieve optimal clipping results, always move the appliance slowly through the hair against the direction of hair growth.
Clipping with hair comb attachment
1Put the hair clipper comb on the full width trimmer attachment and push until you hear it ‘click’ into place (fig. 19).
2Press the Hair Length Selector and slide it to the desired setting. See Table 2.
