General information | Controls |
Multiple headphones with one transmitter
An additional number of headphones and/or wireless speakers can be used with a single transmitter if they:
-operate in the 433 MHz band
-can detect a 19 kHz pilot tone.
Please consult the appliance’s electrical specification sheets for confirmation on compatibility.
Kit contents
This FM headphone system consists of the following accessories:
1 x SBC HC332 FM transmitter
1 x SBC HC305 FM headphone
1 x SBC CS030/00 12Volt / 200mA AC/DC adapter (for UK: SBC CS030/05 12 Volt/ 200 mA AC/DC adapter)
2 x
1 x 3.5 mm plug to 6.3 mm stereo adapter plug
1 x antenna tube
Transmitter (figure 1)
1Power indicator – lights up when audio signals are detected at the audio input.
2DC power – connect to the 12 Volt/ 200 mA AC/DC adapter.
33.5 mm stereo headphone audio input – the audio cable connects your FM transmitter to an audio source.
4Channel switch – select one of
2 channels for best reception.We advise you to select channel 1 as a first option.
5Controls plate Headphone (figure 2)
6Power On/Off – slide the switch to the on or off position to switch the headphone on/off.
7Battery compartment – open the lid, take out the batteries and replace them when empty.
8Volume – adjust volume to your desired listening level.
9Tuning – turn the tuning wheel until the signal is at its clearest.
10Power indication – lights up when in use.
English
5