3
Using the Kettle
C 1 Wind excess power cord around the bottom of the appliance base.
2Place the base of the Kettle on a cool, even level surface, out of the reach of children. Plug cord into a 120V AC
electrical outlet.
Only use the Kettle in combination with its original base.
3Fill the Kettle with water.
Do not put less than 4 oz. / 0.1 liters of water in the Kettle.
Never fill the Kettle while it is standing on its base. If the Kettle boils dry, it will switch off automatically.Then wait 10 minutes before filling with water and switching the Kettle back on again.
Do not fill the Kettle beyond the "MAX" indication.
If too much water has been put in the Kettle, boiling water may spurt out from spout.
C 4 Kettle may be filled through the spout or by opening the lid to directly fill reservoir.
C 5 Close the lid and put the Kettle on its base.The Kettle is equipped with 360° pirouette center connector.
