![](/images/new-backgrounds/1051341/51341113x1.webp)
|
| ENGLISH 55 | |
Machine actions | Causes | Solutions | |
The machine grinds the coffee beans | There is no water. | Fill the water tank and prime the circuit (see "Us- | |
but no coffee comes out. |
| ing the Machine for the First Time" chapter). | |
(See note) |
|
| |
The brew group is dirty. | Clean the brew group (see the "Weekly Cleaning | ||
| |||
|
| of the Brew Group" chapter). | |
|
|
| |
| The circuit is not primed. | Prime the circuit (see "Using the Machine for the | |
|
| First Time" chapter). | |
|
|
| |
| This might occur when the machine is | Brew a few cups of coffee as described in the | |
| automatically adjusting the dose. | “Saeco Adapting System”chapter. | |
|
|
| |
| The dispensing spout is dirty. | Clean the dispensing spout. | |
|
|
| |
Coffee is too weak. | This might occur when the machine is | Brew a few cups of coffee as described in the | |
(See note) | automatically adjusting the dose. | “Saeco Adapting System”chapter. | |
|
|
| |
Coffee is brewed slowly. | The coffee grind is too fi ne. | Change coffee blend or adjust the grind as | |
(See note) |
| explained in chapter "Adjusting the Ceramic | |
|
| Coffee Grinder". | |
|
|
| |
| The circuit is not primed. | Prime the circuit (see "Using the Machine for the | |
|
| First Time" chapter). | |
|
|
| |
| The brew group is dirty. | Clean the brew group (see the "Weekly Cleaning | |
|
| of the Brew Group" chapter). | |
|
|
| |
Coffee leaks out of the dispensing | The dispensing spout is clogged. | Clean the dispensing spout and its holes. | |
spout. |
|
| |
|
|
| |
Milk does not froth. | The Automatic Milk Frother is inserted too | Leave the Automatic Milk Frother to cool down. | |
| deep. No milk is being suctioned. | Move it slightly downwards. Reposition it in its | |
|
| correct seat. | |
|
|
| |
Frothed milk is too cold. | The cups are cold. | Preheat the cups with hot water. |
Note:
These problems can be considered normal if the coffee blend has been changed or if the machine has just been installed. In this case wait until the machine performs a