3.4 Connect and charge

When you connect the player to the PC, it automatically charges.

3.4.1 Use the supplied USB cable

1Before you use the player for the first time, charge it for at least 5 hours.

>The battery2 has a 100% charge after 4 hours and an 80% charge after 2 hours.

2Connect the supplied USB cable to the mini USB port at the bottom of the player, the other end to your PC.

>The player will start to charge as soon as it is connected to your PC.

Note The player is fully charged when the charging animation stops and is displayed. Your fully charged player will allow up to 30 hours2 of music playback.

3.4.2 Battery level indication

The approximate power levels of your battery are indicated as follows:

Full

Two-thirds full

Half full

Low

Empty

Note When the batteries are almost empty, the battery screen blinks.The player saves all settings and unfinished recordings and switches off in less than 60 seconds.

2Rechargeable batteries have a limited number of charge cycles. Battery life and number of charge cycles vary by use and settings.

11

11

Page 16
Image 16
Philips HDD1835/37, SA60XX manual Connect and charge, Use the supplied USB cable, Battery level indication