Quick install guide
Programming recordings with the
G® System
a'Please enter programme number' appears on the screen
bThis message appears when the TV channel has not been assigned yet.
Enter the program number and confirm with OK .
1Switch on the TV set. If required, select the programme number for the DVD recorder.
2Press TIMER s on the remote control. P The 'Schedule' screen will appear
3Press the red function button
Manual |
| Home |
Please enter the
= = = = = = = = =
Grid | Search | Schedule | Info |
No programmes
Once 0
4Enter the entire
e.g.:
Enter 53124 for the
Use therefore the number buttons 0..9 on the remote control.
If you make a mistake you can press D or the green action button to go back a position.
5Confirm with OK .
Manual |
| Home |
Please enter the
1 2 3 4 5 = = = =
Grid |
| Search | Schedule | Info |
| ||
/Record |
|
|
|
|
| Freq. Timing | |
20:00 21:30 | BBC1 |
| Once 0 |
PThe decoded data appears after confirmation.
You can use the colour buttons to make the following settings. First, the right tile must be highlighted ( C button). Check the functions (descriptions) in the corresponding colour field before pressing a button.
Deactivate 'VPS/PDC'!
If 'VPS/PDC' appears instead of the time, press the yellow function button until the 'V/P' sign disappears.
Setting up repeat recordings
You can choose from the following settings with the green action button:
'Frequency': 'Once': single recordings
'M-F': Repeated daily recordings (Monday to Friday).
'Mon': Repeated weekly recordings (every week on the same day e.g. Monday).
6If all information is correct, press the OK button. The data is stored.
7To end, press TIMER s .
If one or more recordings have been programmed 'TIMER' will light up on the display.
6