Quick install guide
Connecting to the TV
1Switch off your TV set.
2Remove the aerial cable plug from your TV set. Insert it into the ANTENNA IN socket at the back of the DVD recorder.
3Insert one end of the supplied aerial cable into the TV
OUT socket at the back of the DVD recorder and the other end into the aerial input socket at the back of the TV set.
4Connect sockets
Connecting to the mains
Always check if the local mains voltage matches the voltage range printed on the type plate at the back or bottom of the
1Switch on the TV set.
2Insert one end of the supplied mains cable into the mains socket
4MAINS at the back of the DVD recorder and the other end into the wall socket.
Initial installation
1Press |
|
P '' and then ' ' will appear on the display. | ENGLISH |
2If necessary, select the programme number for the input socket at | |
the TV set. | |
P The initial installation menu appears on the screen. | |
Virgin mode |
|
| |
Menu Language |
|
English |
|
Español |
|
Français |
|
Italiano |
|
Deutsch |
|
Press OK to continue |
|
3Select your favourite setting using B or A . Confirm with OK .
4Proceed in the same way with the further menus: 'Audio Language', 'Subtitle', 'TV shape', 'Country' .
P The Automatic channel search starts after the confirmation of the message 'If you have connected the antenna - press OK' using OK .
P After all channels have been found, the menu for Time/Date setting appears.
Check the data displayed and change them if necessary
5To end, press SYSTEM MENU .
5