10English

Setting the clock time

You cannot use the Wake-up Light until you have set the clock time.

1

2

,,

3

4

,,

When the hour indication on the display flashes, move the middle dial up or down to select the hour.

Press the middle dial gently and release it to confirm. The minute indication starts flashing (Fig. 6).

Move the middle dial up or down to select the minutes.

Press the middle dial gently and release it to confirm.

The appliance leaves the menu and the display shows the set clock time.

The appliance is now ready for use.

Note: Every time you remove the plug from the wall socket for more than approximately 15 minutes, you have to set the clock time again by following steps 1 to 4 above.

Note:To change the set clock time when the plug is still in the wall socket, press the middle dial gently two times to enter the menu for setting the clock time.You are in the menu when the hour indication flashes.Then follow steps 1 to 4 above.

Using the appliance

Top and bottom dials

-- With the top dial you can switch the lamp on or off and set the light intensity (see section ‘Using the lamp’ in this chapter).

-- With the bottom dial you can switch the radio on or off and set the volume (see section ‘Radio/volume’ in this chapter).

Note: Press the dial gently and release it to switch on or off the light (top dial) or radio (bottom dial) and move the dial up or down to change the light intensity (top dial) or volume level (bottom dial).

Page 10
Image 10
Philips HF3480 manual Setting the clock time, Using the appliance, Top and bottom dials