![](/images/new-backgrounds/1276796/27679617x1.webp)
ENGLISH 9
Occasionally the pivoting head may freeze onto the skin cooler and doesn't move when you take the skin cooler from the freezer.The pivoting head will start pivoting again after you have passed it over your leg a few times.
2Snap the appliance onto the skin cooler (fig. 4).
3Insert the appliance plug into the inlet socket and put the adapter in the wall socket.
4Switch the appliance on by selecting the desired speed (fig. 5). Select speed I for areas with little hair growth and for areas where bones are located directly beneath the skin, such as knees and ankles. Select speed II for larger areas with stronger hair growth.
5Stretch your skin with your free hand to make the hairs stand upright.
6Place the appliance perpendicularly onto the skin and move it against the direction of hair growth (fig. 6).
Make sure both the epilating discs and the skin cooler are in proper contact with the skin.
Do not press the appliance onto the skin.
Epilating underarms and bikini line (HP6479 only)
The special skin cooler for the underarms and bikini line reduces the number of active epilating discs. Combined with the large cooling surface, this skin cooler makes epilating sensitive areas less painful.You will get the best results when the hairs are not too long (max. 1 cm).
1Slide the protective sleeve onto the skin cooler (fig. 7).
2Snap the appliance onto the skin cooler (fig. 8).
3Switch the appliance on by selecting the desired speed (fig. 9). We advise you to use speed II.
4To epilate the underarm area, place one arm behind your head to stretch the skin and place the appliance perpendicularly onto the skin with the hand of the other arm (fig. 10).