![](/images/new-backgrounds/1001421/142143x1.webp)
3 Select a picture, and then press(Play) to start the slideshow.
4 Press to stop slideshow.
5 Press again to stop music.
Note
•• Make sure that the picture and audio formats are supported by your home theater (see 'File formats' on page 37).
Radio
Listen to FM radio on your home theater, and store up to 40 radio stations.
Note
•• AM and digital radio are not supported.
•• If no stereo signal is detected, or if fewer than five stations are found, you are prompted to install the radio stations again.
1 Connect the FM antenna to the ANTENNA FM 75 on your home theater.
• For the best reception, place the antenna away from your TV or other sources of radiation.
2 Press Source buttons repeatedly until RADIO appears on the display panel.
»»If you have already installed the radio stations, the last channel that you listened to is played.
»»If you have not installed any radio stations, the message AUTO INSTALL...PRESS PLAY appears on the display panel. Press (Play).
3 Use the remote control to listen or to change radio stations.
Play buttons
Button | Action |
/ | Select a preset radio station. |
or |
|
Alphanumeric |
|
buttons |
|
Navigation Left/Right: Search for a radio
buttons station.
Up/Down: Fine tune a radio frequency.
Press to stop the installation of radio stations.
BACK Press and hold to erase the preset radio station.
OPTIONS Manual:
1)Press OPTIONS. 2) Press
/
to select your preset. 3) Press
OPTIONS again to store the radio station.
Automatic: Press and hold for three seconds to reinstall the radio stations.
SUBTITLE Toggle between the stereo and mono sounds.
Tuning grid
In some countries, you can toggle the FM tuning grid between 50 kHz and 100 kHz. When you switch the tuning grid, all preset radio stations are erased.
1
2 Press .
3 Press and hold (Play) to toggle between 50 kHz or 100 kHz.
MP3 player
Connect a MP3 player to play audio files.
What you need
22EN