![](/images/new-backgrounds/1001421/142129x1.webp)
•[System Audio Control] (System audio control): If system audio control is enabled, the audio of the connected device is output through your home theater speakers automatically when you play the device.
•[Audio Input Mapping] (Audio input mapping):If system audio control does not work, map the connected device to the correct audio input connector on your home theater.
Note
•• To change the EasyLink control settings, press (Home), select [Setup] > [EasyLink].
Set up the audio
If you cannot hear the audio output of a connected device through your home theater speakers, do the following:
• Check that you have enabled EasyLink on all the devices, (see 'Set up EasyLink
Press (Home).
Select [Setup], and then press OK.
Select [EasyLink] > [System Audio
Control] > [On].
•To play the audio from the TV speakers, select [Off], and skip the following steps.
Select [EasyLink] > [Audio Input
Mapping].
Follow the onscreen instructions to map the connected device to the audio inputs on your home theater.
•If you connect your home theater to the TV through an HDMI ARC connection, make sure that the TV
audio is mapped to the ARC input on your home theater.
Connect and set up a home network
Connect your home theater to a network router through wired or wireless network connection, and enjoy:
•Streamed multimedia content
•Smartphone control (see 'Smartphone control' on page 23)
•Smart TV (see 'Browse Smart TV' on page 25)
•Internet radio (see 'Internet radio' on page 27)
•Software update (see 'Update software through the Internet' on page 35)
Caution
•• Familiarize yourself with the network router, media server software and networking principles. If necessary, read documentation that accompanies the network components. Philips is not responsible for lost, damaged, or corrupt data.
Before you start
•For Smart TV and software updates, make sure that the network router has access to the Internet with
•Make the necessary connections described in the quick start guide, and then switch the TV to the correct source for your home theater.
Set up the wired network
What you need
•A network cable (RJ45 straight cable).
•A network router (with DHCP enabled).
EN 15