Philips HTS3410D Program favorite tracks audio CDs and VCDs, Using the menu bar to program

Disc Operations

E n g l i s h

Repeating a section within a title/ track

1While playing a disc, press REPEAT A-Bat the starting point.

2Press REPEAT A-Bagain to end the section.

➜The section A and B can be set only within the same title/track.

➜The section will now repeat continuously.

3Press REPEAT A-Bagain to resume normal playback.

Program favorite tracks (audio CDs and VCDs)

You can play the contents of the disc in the order you want by programming the order of the tracks to be played. Up to 99 tracks can be stored.

1Stop playback, then press PROG on the front panel to enter program mode.

2Use the numeric keypad (0-9) to enter a valid track number.

➜ "FULL" will appear if you have programmed 99 tracks.

3Press OK to store the track.

4Repeat steps 2~3 to select other tracks.

5 Press ÉÅto start program playback.

Clearing the program

●Stop playback, then press the Ç again. ➜ "PROG CLR" appears.

Helpful Hints:

–If the DVD system is disconnected from the power supply, it will erase the program.

–For VCD, the program option is only possible if the PBC mode is turned off.

Using the menu bar to program

IMPORTANT!

You have to turn on your TV and set to the correct Video In channel. (See page 17 “Setting the TV”.)

1Stop playback, then press SYSTEM MENU.

➜ The menu bar will appear across the top of the TV screen.

2Press 1 2 to select and press 4 to enter the program menu.

PROGRAM P 00 : 00

3Use the numeric keypad (0-9) to enter the track number to be programmed.

➜ "FULL" will appear if you have programmed 99 tracks.

4Press ÉÅto start program playback.

To clear the program

●Stop playback, then press Çagain.

TIPS: The operating features described here might not be possible for certain discs. Always refer to the instructions supplied with the discs.

24