Philips HTS3410D Inserting batteries Setting the TV Into the remote Control, Operate the system

	Getting Started
Step 1: Inserting batteries	Step 2: Setting the TV
into the remote	IMPORTANT!
control
	Make sure you have completed all
3	the necessary connections. (See pages
	11–12 “Connecting TV”.)
1	1 Press SOURCE control until “DISC”
2
	appears on the display panel (or press
	DISC on the remote.)
	2 Turn on the TV and set to the correct
1 Open the battery compartment.	video-in channel. You should see the blue
2 Insert two batteries type R06 or AA,	DVD background screen on the TV.
	➜ Usually this channel is between the
following the indications (+-) inside
	lowest and highest channels and may be
the compartment.
	called FRONT,A/V IN, or VIDEO. See
3 Close the cover.
	your TV manual for more details.
	➜ Or, you may go to channel 1 on your
Using the remote control to	TV, then press the Channel down button
	repeatedly until you see the Video In
operate the system
	channel.
1 Aim the remote control
	➜ Or, the TV remote control may have a
directly at the remote	button or switch that chooses different
sensor (iR) on the front	video modes.
panel.	➜ Or, set the TV to channel 3 or 4 if you
2 Select the source you	are using an RF modulator.

wish to control by pressing one of the source select buttons on the remote control (for example TV,TUNER.)

3Then select the desired

function (for example ÉÅ, S, T.)

CAUTION!

–Remove batteries if they are exhausted or if the remote is not to be used for a long time.

–Do not use old and new or different types of batteries in combination.

–Batteries contain chemical substances, so they should be disposed of properly.

E n g l i s h

17