Basic Connections (continued)
Step 6: Connecting the power cord
TV
1
2 | DVD system |
VOLTAGE SELECTOR
Pr | Y |
L |
|
R
at the bottom of the DVD system
After everything is connected properly,
1Set the VOLTAGE SELECTOR to the local power line voltage.
2Plug in the AC power cord to the power outlet.
The red Eco Power LED on the DVD system will light up. Never make or change any connections with the power switched on.
Helpful Hint:
– Refer to the type plate on the rear or bottom of the system for identification and supply ratings.
11
E n g l i s h
11 | 14/04/2005, 10:37 AM |
