Philips HTS3565D quick start Setting the speakers’ channels, Select Speakers Volume and press, Use

Getting Started (continued)

English

Setting the speakers’ channels

You can adjust the delay times (center and surround only) and volume level for individual speakers. These adjustments let you optimize the sound according to your surroundings and setup.

Before you start...

Stop the disc playback by pressing Ç twice or remove the disc from the disc tray. Otherwise, the settings are not accessible.

A In disc mode, press OPTIONS on the remote control.

B Press	repeatedly to select { Audio
Setup }	icon, then press .

C Select { Speakers Volume } and press

.

Audio Setup
Speakers Volume
Speakers Delay
HDMI Audio
CD Upsampling	Speakers Level Setup
Audio Sync	Front Left	0dB
	Front Right	0dB
	Center	0dB
	Subwoofer	0dB
	Rear Left	0dB
	Rear Right	0dB
Press OPTIONS to exit menu

E Use		keys to highlight { Speakers
	Delay } and press .
		Audio Setup
		Speakers Volume
		Speakers Delay
		HDMI Audio
		CD Upsampling
		Audio Sync	Speakers Distance Setup
			Center	0ms
			Rear Left	0ms
			Rear Right	0ms
		Press OPTIONS to exit	menu
F Use		keys to set the delay times
	(0 ms ~ 15 ms) for centre and rear
	speakers that best suit your surround
	sound needs.

G Press OK to confi rm.

Helpful Hints:

–A 1ms increase/decrease of delay time is equivalent to 30 cm change in distance.

–Use the longer delay time settings when the rear speakers are closer to the listener than the front speakers.

–The test tone will be generated to help you judge the sound level of each speaker.

D Use keys to set the volume level for

each speaker (-6dB ~ +6dB) and press OK to confi rm.

24

1_hts3565-66D_37_eng2_final813.i24 24 2008-03-27 3:12:01 PM