Troubleshooting
WARNING
Under no circumstances should you try to repair the system yourself, as this will invalidate the warranty. Do not open the system as there is a risk of electric shock.
If a fault occurs, fi rst check the points listed below before taking the system for repair. If you are unable to solve a problem by following these instructions, consult your dealer or Philips for help.
Problem (General) |
| Solution |
No picture. | – | Refer to your TV manual for correct Video In channel |
|
| selection. Change the TV channel until you see the |
|
| DVD screen. |
| – | Press DISC to select disc mode. |
| – | If this happens when you turn on the progressive scan |
|
| feature or change the HDMI video setting, wait for 15 |
|
| seconds for the auto recover or switch to the default |
|
| mode as below: |
|
| 1) Press ç to open the disc tray. |
2) Press on the remote control.
3)Press AUDIO SYNC (for progressive scan) or ZOOM (for HDMI video) on the remote control.
English
Completely distorted picture or black/white picture.
No sound or distorted sound.
No surround sound effect from the speakers.
–Check the video connection.
–Sometimes a small amount of picture distortion may appear. This is not a malfunction.
–The disc is dirty. Clean the disc.
–Adjust the volume.
–Check the speaker connections and settings.
–Make sure that the audio cables are connected and press the correct source button (for example, AUX (MP3 LINK)) to choose the device that you want to hear through this unit.
–When playback with DTS track, press AUDIO SYNC to select other audio track.
–Press SURROUND to select a correct surround sound setting.
–Make sure that the source you are playing is recorded or broadcast in surround sound (Dolby Digital, etc.).
The remote control does not – Select the source you want to play (for example,
function properly.DISC, USB or RADIO) before pressing the function button (u, í / ë).
–Reduce the distance between the remote control and this unit.
–Batteries are weak, replace the batteries.
–Point the remote control directly toward the IR sensor.
53
