SETUPS
You can limit the Internet access from the
1)Follow steps 1) to 5) in “Connection Test” on page 44.
2)Use [K / L] to highlight “Enable(Custom)”, then press [OK].
3)Use [K / L] to highlight
4)Use [K / L] to highlight the desired setting, then press [OK].
Internet access is permitted from all
Internet access is permitted only for
Internet access is prohibited from all
5)Press [BACK U] to go back to the previous screen, or press [HOME ] to go back to the home menu.
You can check the status of network settings.
1)Follow steps 1) to 5) in “Connection Test” on page 44.
2)Use [K / L] to highlight “Enable(Custom)”, then press [OK].
3)Use [K / L] to highlight “Network Status”, then press [OK].
• Network setting list will be displayed.
4)Press [BACK U] to go back to the previous screen, or press [HOME ] to go back to the home menu.
Software Upgrade
Disc Upgrade
HOME A“PlaySetup”Disc A“Custom” A “Other” A“SoftwareUpgrade” AUpgrade”“Disc
You can upgrade the software by using disc.
1)Follow steps 1) to 4) in “Connection Test” on page 44.
2)Use [K / L] to highlight “Software Upgrade”, then press [OK].
3)Use [K / L] to highlight “Disc Upgrade”, then press [OK].
4)Use [K / L] to highlight “Yes”, then press [OK].
5)Disc tray will open automatically.
•Insert the disc for software upgrade and then press [OPEN/CLOSE A].
6)After completing loading disc, confirmation message will appear. Use [s / B] to highlight “Yes” and press [OK] to start upgrading.
•It may take a while to complete the upgrading.
7)After the disc upgrade finishes, this unit will restart and open the disc tray automatically. Remove the disc.
•Please visit www.philips.com/support to download the latest firmware version.
•Please do not unplug the AC power code while executing the “Disc Upgrade”.
•All settings will remain the same even if you upgrade the firmware version.
Tuning Radio Playback Setup Basic Connections Introduction
Disable
HOME A“PlaySetup”Disc A“Custom” A“Other” AConnection”“Network A“Disable”
Deactivate all the network connection and settings.
1)Follow steps 1) to 5) in “Connection Test” on page 44.
2)Use [K / L] to highlight “Disable”, then press [OK].
3)Use [K / L] to highlight “Yes”, then press [OK].
4)Press [BACK U] to go back to the previous screen, or press [HOME ] to go back to the home menu.
•The network connection can be reactivated by setting the network connection to “Enable(Easy)” or “Enable(Custom)”.
Others Setup Function
EN 47