FUNCTIONAL OVERVIEW

Front Panel

1

2

3*

4

5

6

7

8* 9

10

11

12

 

 

 

 

 

 

 

 

PUSH

 

 

 

 

 

 

 

VOLUME

 

 

 

 

 

* The unit can also be turned on by pressing these buttons.

1.Q(STANDBY-ON)button

•Press to turn on the unit, or to turn the unit into the standby mode. (To completely shut down the unit, you must unplug the AC power cord.)

2.Disc tray

•Place a disc when opening the disc tray.

3.A (OPEN/CLOSE) button*

•Press to open or close the disc tray.

4.Infrared sensor window

•Receive signals from your remote control so that you can control the unit from a distance.

5.Display

•Refer to “Front Panel Display” on page 11.

6.VOLUME jog

•Rotate to adjust the volume.

7.C (STOP) button

•Press to stop playback.

8.B (PLAY) button*

•Press to start or resume playback.

9.H / G (PREV/NEXT) button

•Press to skip to the previous or next title/chapter/ track.

10.SOURCE button

•Press to select the relevant active source mode; “DISC”, “AUX”, “FM”, “iPod” or “D-IN”.

The following jacks are under the flap at the right corner of the front panel.

11.SD CARD slot

•Insert an SD Memory Card and play back the contents in it.

12.iPod DOCK jack

•Use to connect to the iPod docking station.

Rear Panel

1

2

3

9

8 7

1.AC Power Cord

•Connect to a standard AC outlet to supply power to this unit.

•Unplug this cord from the AC outlet to completely shut down the unit.

2.AUDIO IN (AUX) jacks

•Use to connect to other device with audio out jacks with an RCA audio cable.

3.COMPONENT VIDEO OUT jacks

•Use to connect a TV monitor with component video inputs with a component video cable.

4.FM ANT 75Ω jack

•Use to connect to an external FM wire antenna.

5.HDMI OUT jack

•Use to connect to a display with an HDMI compatible port with an HDMI cable.

4

 

 

5

6

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6.LAN Terminal

•Use to connect a telecommunications equipment with LAN cable.

7.VIDEO OUT jack

•Use to connect a TV monitor, an AV receiver / amplifier or other device with an RCA video cable.

8.DIGITAL IN (OPTICAL) jack

•Use to connect to other device with digital audio optical output jacks with a digital audio optical cable.

9.5.1ch Audio Out jacks (SPEAKERS (6Ω))

•Use to connect to 5.1ch speakers.

Note

•Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage to the unit.

•This unit does not have the RF modulator.